1865a coax - sub-miniature for more information please call 1-800-belden1 see put-ups and colors description: 25 awg stranded (19x37) .021" bare copper conductor, gas-injected foam hdpe insulation, duofoil? + tinned copper braid shield (95% coverage), pvc jacket. physical characteristics: conductor: number of coax 1 total number of conductors 1 rg type sub-miniature 59/u awg 25 stranding 19x37 conductor diameter .021 in. conductor material bc - bare copper insulation: insulation material gas-injected fhdpe - foam high density polyethylene insulation diameter .094 in. outer shield: outer shield material trade name duofoil? outer shield type tape/braid outer shield material : layer number trade name type material % coverage (%) 1 duofoil? tape aluminum foil-polyester tape-aluminum foil 100 2 braid tc - tinned copper 95 outer shield %coverage 100 % outer jacket: outer jacket material pvc - polyvinyl chloride overall nominal diameter: overall nominal diameter .150 in. mechanical characteristics: operating temperature range -40c to +75c ul temperature rating 75c page 1 of 4
1865a coax - sub-miniature bulk cable weight 16 lbs/1000 ft. max. recommended pulling tension 30 lbs. min. bend radius (install) 1.5 in. applicable specifications and agency compliance: applicable standards: nec/(ul) specification cmr cec/c(ul) specification cmg eu ce mark (y/n) yes eu rohs compliant (y/n) yes eu rohs compliance date (mm/dd/yyyy): 01/01/2004 flame test: ul flame test ul1666 vertical shaft sweep test: sweep testing 100% sweep tested 5 mhz to 3 ghz. suitability: suitability - indoor yes suitability - outdoor yes - black only suitability - aerial yes - black only, when supported by a messenger wire suggested connectors bnc - kings 2025-47-9 plenum/non-plenum: plenum (y/n) n electrical characteristics: nom. characteristic impedance 75 ohms nom. inductance .093 h/ft nom. capacitance conductor to shield 16.5 pf/ft nominal velocity of propagation 82 % nominal delay 1.24 ns/ft nom. conductor dc resistance @ 20 deg. c 27.4 ohms/1000 ft nominal outer shield dc resistance @ 20 deg.c 5.4 ohms/1000 ft minimum return loss : description frequency (mhz) start frequency (mhz) stop frequency (mhz) minimum return loss (db) 5 850 21 851 3000 18 nom. attenuation : page 2 of 4
1865a coax - sub-miniature description frequency (mhz) start frequency (mhz) stop frequency (mhz) nom. attenuation (db/100 ft.) 1 .47 3.58 1.0 5 1.1 7 1.3 10 1.6 67.5 3.6 71.5 3.7 88.5 4.1 100 4.4 135 5.0 143 5.1 180 5.8 270 7.1 360 8.2 540 10.1 720 11.8 750 12.0 1000 13.9 1500 17.0 2000 19.6 2250 20.8 3000 24.0 max. operating voltage - ul 300 v rms other electrical characteristic 1 impedance tested in accordance with astm d-4566 paragraph 43.2, option 2 using a 75 ohm fixed bridge and termination. 75 +/- 1.5 ohms other electrical characteristic 2 return loss tested in accordance with astm d-4566 paragraph 45.3, using a 75 ohm fixed bridge and termination. put-ups and colors: item description put-up (ft.) ship weight (lbs.) jacket color notes 1865a 0011000 #25 gifhdpe sh fr pvc 1000 14 brown c 1865a 0021000 #25 gifhdpe sh fr pvc 1000 14 red c 1865a 0031000 #25 gifhdpe sh fr pvc 1000 14 orange 1865a 0041000 #25 gifhdpe sh fr pvc 1000 14 yellow 1865a 0061000 #25 gifhdpe sh fr pvc 1000 14 blue, light c 1865a 0071000 #25 gifhdpe sh fr pvc 1000 14 violet c 1865a 0081000 #25 gifhdpe sh fr pvc 1000 14 gray 1865a 0091000 #25 gifhdpe sh fr pvc 1000 14 white c page 3 of 4
1865a coax - sub-miniature 1865a 0101000 #25 gifhdpe sh fr pvc 1000 14 black c 1865a n3u1000 #25 gifhdpe sh fr pvc 1000 14 green, mil c = crate reel put-up. revision number: 3 revision date: 08-24-2005 ? copyright 2006 belden, inc all rights reserved. although belden ("belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. belden provides the information and specifications herein on an "as is" basis, with no representations or warranties, whether express, statutory or implied. in no event will belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. all sales of belden products are subject to belden's standard terms and conditions of sale. belden believes this product to be in compliance with the following environmental regulations: california proposition 65 consent judgment for wire & cable mfgs.(san francisco superior court nos. 312962 and 320342); eu rohs (directive 2002/95/ec, 27-jan- 2003);material manufactured prior to the compliance date may still be in stock at belden facilities and in our distributor's inventory. eu elv (directive 2000/53/ec, 18-sept-2000); eu weee (directive 2002/96/ec, 27-jan-2003); and eu bfr (directive 2003/11/ec, 6-feb- 2003). the information provided in this product disclosure, and the identification of materials listed as reportable or restricted within the product disclosure, is correct to the best of belden's knowledge, information and belief at the date of its publication. the information provided in the product disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. this product disclosure is not to be considered a warranty or quality specification. regulatory information is for guidance purposes only. product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. belden declares this product to be in compliance with eu lvd (low voltage directive 73/23/eec), as amended by directive 93/68/eec. page 4 of 4
|
